HP Dv9575la - Pavilion - Core 2 Duo 1.8 GHz Maintenance And Service Manual Download Page 96

Page: 96 / 177

Remove the ExpressCard assembly:

Press the ExpressCard slot bezel

(1)

to release the bezel from the ExpressCard slot.

Remove the ExpressCard slot bezel

(2)

. The ExpressCard slot bezel is included in the Plastics Kit,

spare part number 432981-001.

Remove the four silver Phillips PM2.5×5.0 screws

(1)

that secure the ExpressCard assembly to

the system board.

Disconnect the ExpressCard assembly

(2)

from the system board by sliding it to the right.

Remove the ExpressCard assembly

(3)

Chapter 4 Removal and replacement procedures

Summary of Contents for Dv9575la - Pavilion - Core 2 Duo 1.8 GHz


















































































































































































Search results

Summary of Contents for Dv9575la - Pavilion - Core 2 Duo 1.8 GHz

Reviews:

Related manuals for Dv9575la - Pavilion - Core 2 Duo 1.8 GHz

Brands by name

Popular brands

HP Dv9575la - Pavilion - Core 2 Duo 1.8 GHz, Maintenance And Service Manual

Search results

Summary of Contents for Dv9575la - Pavilion - Core 2 Duo 1.8 GHz

Reviews:

Related manuals for Dv9575la - Pavilion - Core 2 Duo 1.8 GHz

Brands by name

Popular brands