HP Dv9575la - Pavilion - Core 2 Duo 1.8 GHz Maintenance And Service Manual Download Page 101

Page: 101 / 177

Remove the rear USB board:

Remove the two silver Phillips PM2.5×5.0 screws

(1)

that secure the power connector bracket to

the computer.

Remove the power connector bracket

(2)

. The power connector bracket is available using spare

part number 432985-001.

Remove the silver Phillips PM2.5×5.0 screw

(1)

that secures the rear USB board to the base

enclosure.

Remove the rear USB board cable from the clips

(2)

built into the base enclosure.

Release the rear USB board

(3)

from the base enclosure as far as the rear USB board cable allows.

Disconnect the rear USB board cable

(4)

from the rear USB board.

Remove the rear USB board.

Reverse this procedure to install the rear USB board.

Component replacement procedures

Summary of Contents for Dv9575la - Pavilion - Core 2 Duo 1.8 GHz


















































































































































































Search results

Summary of Contents for Dv9575la - Pavilion - Core 2 Duo 1.8 GHz

Reviews:

Related manuals for Dv9575la - Pavilion - Core 2 Duo 1.8 GHz

Brands by name

Popular brands

HP Dv9575la - Pavilion - Core 2 Duo 1.8 GHz, Maintenance And Service Manual

Search results

Summary of Contents for Dv9575la - Pavilion - Core 2 Duo 1.8 GHz

Reviews:

Related manuals for Dv9575la - Pavilion - Core 2 Duo 1.8 GHz

Brands by name

Popular brands