HP Dv9575la - Pavilion - Core 2 Duo 1.8 GHz Maintenance And Service Manual Download Page 23

Page: 23 / 177

TouchPad

Item

Component

Function

(1)

TouchPad light

●

Blue: TouchPad is enabled.

●

Amber: TouchPad is disabled.

(2)

TouchPad*

Moves the pointer and selects or activates items on the
screen.

(3)

TouchPad left and right buttons*

Function like the left and right buttons on an external
mouse.

(4)

TouchPad on/off button

Enables/disables the TouchPad.

(5)

TouchPad scroll zone

Scrolls up or down.

*This table describes factory settings. View or change pointing device preferences by selecting

Start > Control Panel >

Hardware and Sound > Mouse

Top components

Summary of Contents for Dv9575la - Pavilion - Core 2 Duo 1.8 GHz


















































































































































































Search results

Summary of Contents for Dv9575la - Pavilion - Core 2 Duo 1.8 GHz

Reviews:

Related manuals for Dv9575la - Pavilion - Core 2 Duo 1.8 GHz

Brands by name

Popular brands

HP Dv9575la - Pavilion - Core 2 Duo 1.8 GHz, Maintenance And Service Manual

Search results

Summary of Contents for Dv9575la - Pavilion - Core 2 Duo 1.8 GHz

Reviews:

Related manuals for Dv9575la - Pavilion - Core 2 Duo 1.8 GHz

Brands by name

Popular brands