Troubleshooting Information
Table E-6: Is the IMD On or Does the Server Have Video?
Answer
Possible Reasons
The Next Step
Yes
Video is available for diagnosis.
Determine the next action by observing
POST progress and error messages.
Refer to the
HP Servers
Troubleshooting Guide
for a complete
description of each POST error
message.
No
Video may not be connected
properly.
Switches may not be set correctly
on the system board.
A processor may have failed.
A nonbootable memory
configuration may be present.
Is a video board installed? Make sure
that the video cable is properly
connected.
Verify the video connections. Refer to
the
HP Servers Troubleshooting Guide.
Verify the switch settings on the system
board. Refer to “Switches” in
Appendix D.
If Cartridge Power LEDs for all installed
memory cartridges are blinking, and
selected DIMM status LEDs are
blinking, refer to Table E-8.
Are there any audible indicators, such
as a series of beeps? A series of beeps
are the audible signal indicating the
presence of a POST error message.
Refer to the
HP Servers
Troubleshooting Guide
for a complete
description of each beep sequence and
the corresponding error messages.
E-14
HP ProLiant DL760 Generation 2 Server User Guide
HP CONFIDENTIAL
Writer: Jennifer Hayward File Name: o-appe Troubleshooting Information.doc
Codename: Pioneer Part Number: 201264-002 Last Saved On: 6/17/03 10:42 AM
