manualshive.com logo in svg

HP DL760 - ProLiant - 1 GB RAM, User Manual

Share
Download
HP DL760 - ProLiant - 1 GB RAM User Manual Download Page 35

Server Features 

ROM-Based Setup Utility 

The ROM-Based Setup Utility (RBSU) automatically configures the system based on 
the selected operating system. RBSU supports a wide range of configuration 
customization features, including: 

• 

Selection of a primary operating system from a list of supported operating 
systems 

• 

Selection of a Primary Boot Controller from a list of installed mass storage 
devices 

• 

Configuration of embedded system devices, such as serial and mouse ports 

• 

Configuration of standard interrupts (IRQs) for PCI devices 

• 

Setting of date and time 

• 

Configuration of IMD and system asset text 

• 

Automatic resolution of resource conflicts in areas such as port addresses and 
interrupts (IRQs) 

• 

Storage of configuration in nonvolatile memory 

The RBSU is preinstalled in the embedded system ROM on the server. The RBSU 
has embedded support for English, French, German, Italian, Spanish, and Japanese 
languages. 

 

NOTE:

  Systems that use RBSU do not support the System Configuration Utility. For additional 

information on using RBSU, refer to the 

ROM-Based Setup Utility User Guide

 located on the 

Documentation CD. 

Remote-Flash Redundant ROM 

This server is equipped with a Remote-Flash Redundant ROM that enables the 
system to recover the last known good system ROM if the current system ROM has 
been corrupted. When the server leaves the factory, both system ROMs contain the 
same image. 

1-18

 

HP ProLiant DL760 Generation 2 Server User Guide 

  

HP CONFIDENTIAL

 

Writer: Jennifer Hayward File Name: b-ch1 Server Features.doc 

Codename: Pioneer Part Number: 201264-002 Last Saved On: 6/16/03 1:43 PM 

Summary of Contents for DL760 - ProLiant - 1 GB RAM












































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands