manualshive.com logo in svg

HP DL385 - ProLiant - G5, User Manual

Share
Download
HP DL385 - ProLiant - G5 User Manual Download Page 64

64 

 HP ProLiant DL385 Server User Guide 

 

 

5.

 

Install the DIMM. 

 

6.

 

Install the access panel ("Installing the access panel" on page 

39

). 

 

Hot-plug SCSI hard drive options 

When adding SCSI hard drives to the server, observe the following general 
guidelines:  

•

 

A maximum of 14 SCSI devices per channel can be added. 

•

 

Each SCSI drive must have a unique ID. The system automatically sets all 
SCSI IDs. 

•

 

The SCSI ID for each hot-plug hard drive is set automatically to the next 
sequential ID number in a series beginning with ID0. 

•

 

If only one SCSI hard drive is used, install it in the bay with the lowest 
number. 

•

 

Hot-plug hard drives must be either Wide Ultra2, Ultra3, or Ultra320 SCSI 
types. Mixing these types with other drive standards degrades the overall 
performance of the drive subsystem. 

•

 

Drives must be the same capacity to provide the greatest storage space 
efficiency when drives are grouped together into the same drive array. 

 

Summary of Contents for DL385 - ProLiant - G5















































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands