HP DL385 - ProLiant - G5, User Manual

Page: 22 / 174

22 HP ProLiant DL385 Server User Guide
System LEDs and internal health LED combinations
When the internal health LED on the front panel illuminates either amber or red,
the server is experiencing a health event. Combinations of illuminated system
LEDs and the internal health LED indicate system status.
The front panel health LEDs indicate only the current hardware status. In some
situations, HP SIM ("HP Systems Insight Manager" on page
113 ) may report
server status differently than the health LEDs because the software tracks more
system attributes.
System LED and
Color Internal Health
LED Color Status
Processor failure,
socket X
(amber) Red (flashing) One or more of the following conditions may exist:
• Processor in socket X has failed.
• Processor X is not installed in the socket.
• Processor X is unsupported.
• ROM detects a failed processor during POST.
Amber (flashing) Processor in socket X is in a pre-failure condition.
PPM failure, slot X
(amber) Red (flashing) • PPM in slot X has failed.
• PPM is not installed in slot X, but the corresponding
processor is installed.
DIMM failure, slot X
(amber) Red (flashing) • DIMM in slot X has failed.
Amber (flashing) • DIMM in slot X is in a pre-failure condition.
DIMM failure, all slots
in one bank (amber) Red (flashing) No valid or usable memory is installed in the system.
Overtemperature
(amber) Red (flashing) • The Health Driver has detected a cautionary
temperature level.
• The server has detected a hardware critical
temperature level.
Riser interlock
(amber) Red (flashing) PCI riser cage is not seated.
Power converter
module (amber) Red (flashing) Power converter module has failed.