manualshive.com logo in svg

HP DL385 - ProLiant - G5, User Manual

Share
Download
HP DL385 - ProLiant - G5 User Manual Download Page 55

 

Server setup 

55 

 

 

IMPORTANT:  When using cable management arm components, be 
sure to leave enough slack in each of the cables to prevent damage to 
the cables when the server is extended from the rack. 

 

7.

 

Connect the power cord to the AC power source. 

  WARNING:  To reduce the risk of electric shock or damage 

to the equipment: 

•

 

Do not disable the power cord grounding plug. The grounding 
plug is an important safety feature. 

•

 

Plug the power cord into a grounded (earthed) electrical outlet 
that is easily accessible at all times. 

•

 

Unplug the power cord from the power supply to disconnect 
power to the equipment. 

•

 

Do not route the power cord where it can be walked on or 
pinched by items placed against it. Pay particular attention to 
the plug, electrical outlet, and the point where the cord extends 
from the server.     

 

Powering up and configuring the server 

To power up the server, press the Power On/Standby button. 

While the server boots, RBSU and the ORCA utility are automatically 
configured to prepare the server for operating system installation.  

Summary of Contents for DL385 - ProLiant - G5















































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands