manualshive.com logo in svg

HP DL320 - ProLiant - G3, User Manual, Page: 72 / 119

Share
Download
HP DL320 - ProLiant - G3 User Manual Download Page 72

72 

 HP ProLiant DL320 Generation 3 Server User Guide 

 

 

Important safety information 

Familiarize yourself with the safety information in the following sections before 
troubleshooting the server. 

   Important safety information 

Before servicing this product, read the Important Safety Information document 
provided with the server. 

 

Symbols on equipment 

The following symbols may be placed on equipment to indicate the presence of 
potentially hazardous conditions. 

 

  This symbol indicates the presence of hazardous 

energy circuits or electric shock hazards. Refer all servicing to 
qualified personnel. 

WARNING:  To reduce the risk of injury from electric shock 
hazards, do not open this enclosure. Refer all maintenance, 
upgrades, and servicing to qualified personnel. 

  

 This symbol indicates the presence of electric 

shock hazards. The area contains no user or field serviceable 
parts. Do not open for any reason. 

WARNING:  To reduce the risk of injury from electric shock 
hazards, do not open this enclosure. 

 

  This symbol on an RJ-45 receptacle indicates a 

network interface connection. 

WARNING:  To reduce the risk of electric shock, fire, or damage to 
the equipment, do not plug telephone or telecommunications 
connectors into this receptacle. 

Summary of Contents for DL320 - ProLiant - G3
























































































































Reviews:

No comments