manualshive.com logo in svg

HP DL320 - ProLiant - G3, User Manual, Page: 36 / 119

Share
Download
HP DL320 - ProLiant - G3 User Manual Download Page 36

36 

 HP ProLiant DL320 Generation 3 Server User Guide 

 

 

Two methods are available to install an OS on the server: 

•

 

SmartStart assisted installation—Insert the SmartStart CD into the CD-ROM 
drive and reboot the server. 

NOTE:  The SmartStart assisted installation is available only when a 
PCI-based SCSI controller is installed. This feature is not available 
when configuring drives with the embedded SATA controller. 

•

 

Manual installation—Insert the OS CD into the CD-ROM drive and reboot 
the server. This process may require you to obtain additional drivers from the 
HP website (

http://www.hp.com/support

). 

Follow the on-screen instructions to begin the installation process. 

NOTE:  For SATA RAID configuration, a driver diskette must be 
created. 

For information on using these installation paths, refer to the SmartStart 
installation poster in the HP ProLiant Essentials Foundation Pack, included with 
the server. 

 

Registering the server 

To register a server, refer to the registration card in the HP ProLiant Essentials 
Foundation Pack or the HP Registration website (

http://register.hp.com

). 

 

Summary of Contents for DL320 - ProLiant - G3
























































































































Reviews:

No comments