manualshive.com logo in svg

HP DL320 - ProLiant - G3, User Manual, Page: 35 / 119

Share
Download
HP DL320 - ProLiant - G3 User Manual Download Page 35

 

Server setup 

35 

 

 

Item Description 

4 UID 

button/LED 

5 

10/100/1000 NIC 1 

6 

10/100/1000 NIC 2 

7 

iLO management port 

8 Serial 

connector 

9 Mouse 

connector 

10 Keyboard 

connector 

11 Video 

connector 

12 USB 

connectors 

   

 

Powering up and configuring the server 

To power up the server, press the Power On/Standby button. 

While the server boots, RBSU and the ORCA utility are automatically 
configured to prepare the server for operating system installation. To configure 
these utilities manually: 

•

 

Press the F8 key when prompted during the array controller initialization to 
configure the array controller using ORCA. 

•

 

Press the F9 key when prompted during the boot process to change the server 
settings, such as the settings for language and operating system, using RBSU. 
The system is set up by default for the English language and a Microsoft® 
Windows® 2000 installation. 

For more information on the automatic configuration, refer to the ROM-Based 
Setup Utility User Guide located on the Documentation CD. 

 

Installing the operating system 

To operate properly, the server must have a supported OS. For the latest 
information on OS support, refer to the HP website 
(

http://www.hp.com/go/supportos

). 

Summary of Contents for DL320 - ProLiant - G3
























































































































Reviews:

No comments