HP Compaq Presario CQ62 Maintenance And Service Manual Download

Page: 29 / 146

Illustrated parts catalog

Serial number location

When ordering parts or requesting information, provide the computer serial number and model
number located in the battery bay of the computer.

Component

Description

(1)

Product name

The name affixed to the front of the computer.

(2)

Serial number (s/n)

An alphanumeric identifier that is unique to each product.

(3)

Part number/Product number (p/n)

This number provides specific information about the product’s
hardware components. The part number helps a service technician
to determine what components and parts are needed.

(4)

Warranty period

The duration of the warranty period for the computer.

(5)

Model description

An alphanumeric identifier used to locate documents, drivers, and
support for the computer.

ENWW

Serial number location

Summary of Contents for Compaq Presario CQ62



















































































































































Search results

Summary of Contents for Compaq Presario CQ62

Reviews:

Related manuals for Compaq Presario CQ62

Brands by name

Popular brands

HP Compaq Presario CQ62, Maintenance And Service Manual

Search results

Summary of Contents for Compaq Presario CQ62

Reviews:

Related manuals for Compaq Presario CQ62

Brands by name

Popular brands