3.
Use the arrow keys to select a language, and then press
enter
key.
4.
When a confirmation prompt with your language selected displays, press the
enter
key.
5.
To save your change and exit Setup Utility, use the arrow keys to select
Exit
>
Exit Saving
Changes
, and then press the
enter
key.
Changes goes into effect immediately.
Navigating and selecting in Setup Utility
Because Setup Utility is not Windows based, it does not support the TouchPad. Navigation and
selection are by keystroke.
●
To choose a menu or a menu item, use the arrow keys.
●
To choose an item in a list or to toggle a field, for example an Enable/Disable field, use either the
arrow keys or the
f5
or
f6
keys.
●
To select an item, press the
enter
key.
●
To close a text box or return to the menu display, press the
esc
key.
●
To display additional navigation and selection information while Setup Utility is open, press the
f1
key.
Displaying system information
The following procedure explains how to display system information in Setup Utility. If Setup Utility is
not open, begin at step 1. If Setup Utility is open, begin at step 2.
1.
Open Setup Utility by turning on or restarting the computer. When the Press the ESC key for
Startup Menu message displays in the lower-left corner of the screen, press the
f10
key.
– or –
Open Setup Utility by turning on or restarting the computer. When the Press the ESC key for
Startup Menu message displays in the lower-left corner of the screen, press the
esc
key. When
the Startup Menu displays, press the
f10
key.
2.
Select the
Main
menu. System information such as the system time and date, and identification
information about the computer is displayed.
3.
To exit Setup Utility without changing any settings, use the arrow keys to select
Exit
>
Exit
Discarding Changes
, and then press the
enter
key.
90
Chapter 5 Setup Utility
ENWW
Summary of Contents for Compaq Presario CQ62
