manualshive.com logo in svg

HP Compaq Presario CQ62, Maintenance And Service Manual

Share
Download
HP Compaq Presario CQ62 Maintenance And Service Manual Download Page 120

Using Windows Backup and Restore

To create a backup using Windows Backup and Restore:

NOTE:

Be sure that the computer is connected to AC power before starting the backup process.

NOTE:

The backup process might take over an hour, depending on file size and the speed of the

computer.

1.

Select 

Start

 

>

 

All Programs

 

>

 

Maintenance

 

>

 

Backup and Restore

.

2.

Follow the on-screen instructions to set up and create a backup.

NOTE:

Windows includes the User Account Control feature to improve the security of the computer.

You may be prompted for your permission or password for tasks such as installing software, running
utilities, or changing Windows settings. See Help and Support for more information.

110 Chapter 7   Backup and recovery

ENWW

Summary of Contents for Compaq Presario CQ62



















































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands