manualshive.com logo in svg

HP Compaq nw8440, Maintenance And Service Manual, Page: 95 / 237

Share
Download
HP Compaq nw8440 Maintenance And Service Manual Download Page 95

Removal and Replacement Procedures

Maintenance and Service Guide

5–5

5.3 Preparing the Computer for 

Disassembly

Before you begin any removal or installation procedures: 

1. Shut down the computer. If you are unsure whether the 

computer is off or in hibernation, turn the computer on, 
and then shut it down through the operating system.

2. Disconnect all external devices connected to the computer.

3. Disconnect the power cord.

4. Remove the battery by following these steps:

a. Turn the computer upside down with the rear panel 

toward you.

b. Slide the battery release latch on the right 

1

 and then the 

battery release latch on the left 

2

 to release the battery.

c. Slide the battery pack 

3

 straight back and remove it.

Removing the Battery Pack

Reverse the above procedure to install the battery pack.

Battery Spare Part Number Information

8-cell, 4.8-AHr

372771-001

Summary of Contents for Compaq nw8440














































































































































































































































Reviews:

No comments