manualshive.com logo in svg

HP Compaq nw8440, Maintenance And Service Manual

The HP Compaq nw8440 Maintenance And Service Manual is a comprehensive guide that provides detailed instructions on how to maintain and service your HP Compaq nw8440 laptop. Easily download this manual for free from our website, and get access to valuable information to keep your device running smoothly.

Share
Download
background image

Removal and Replacement Procedures

Maintenance and Service Guide

5–41

4. Make note of which antenna cable is attached to which 

antenna clip on the Mini Card module before disconnecting 
the cables, then disconnect the auxiliary and main antenna 
cables 

1

 from the Mini Card module.

5. Remove the two Phillips PM2.0×4.0 screws 

2

 that secure the 

Mini Card module to the computer. (The edge of the module 
opposite the socket rises away from the computer.)

6. Remove the Mini Card module by pulling the module 

3

 

away from the socket at an angle.

✎

Mini Card modules are designed with a notch

4

 to prevent 

incorrect installation.

Removing a Mini Card Module

Reverse the above procedure to install a Mini Card module.

Summary of Contents for Compaq nw8440














































































































































































































































Reviews:

No comments

Related manuals for Compaq nw8440

EUROCOM UNO 2.1 User Manual preview
UNO 2.1
Brand: EUROCOM Pages: 271
DFI GM831-CSF Installation Manual preview
GM831-CSF
Brand: DFI Pages: 13
Commodore PC 10-1 Service Manual preview
PC 10-1
Brand: Commodore Pages: 23
Compaq Pavilion Slimline s5500 - Desktop PC Reference Manual preview
Pavilion Slimline s5500 - Desktop PC
Brand: Compaq Pages: 36
NUANCE PowerScribe User Manual preview
PowerScribe
Brand: NUANCE Pages: 2
Dell Inspiron 3470 Owner'S Manual preview
Inspiron 3470
Brand: Dell Pages: 51
Dell INSPIRON Inspiron 1100 Owner'S Manual preview
INSPIRON Inspiron 1100
Brand: Dell Pages: 95
Dell Inspiron 24-5400 Setup And Specifications preview
Inspiron 24-5400
Brand: Dell Pages: 26
Dell Inspiron 3472 Setup And Specifications preview
Inspiron 3472
Brand: Dell Pages: 20
Acnodes LW 910 Specifications preview
LW 910
Brand: Acnodes Pages: 2
Rasmus Althoff CT800 Manual preview
CT800
Brand: Rasmus Althoff Pages: 32
Gateway DX420QS Setting Up preview
DX420QS
Brand: Gateway Pages: 2
Gateway dx4870 User Manual preview
dx4870
Brand: Gateway Pages: 98
Gateway GM5407H User Manual preview
GM5407H
Brand: Gateway Pages: 190
ViewSonic VPC221 Specifications preview
VPC221
Brand: ViewSonic Pages: 2
Monit Rally Q-10 Operations & Installation Manual preview
Q-10
Brand: Monit Rally Pages: 2
Moxa Technologies DA-682C Series User Manual preview
DA-682C Series
Brand: Moxa Technologies Pages: 53
Penpower Technology Wireless Pen User Manual preview
Wireless Pen
Brand: Penpower Technology Pages: 82

Brands by name

Popular brands

Load more brands