HP Compaq nw8440 Maintenance And Service Manual Download Page 106

Page: 106 / 237

5–16

Maintenance and Service Guide

Removal and Replacement Procedures

5.8 Bluetooth Module

1. Prepare the computer for disassembly (refer to

Section 5.3

2. Position the computer with the right side toward you.

3. Loosen the Phillips PM1.5×3.0 screw

that secures

the Bluetooth module cover to the computer.

4. Remove the Bluetooth module cover

from the computer.

✎

The Bluetooth module cover is included in the Plastics Kit,
spare part number 417527-001.

5. Disconnect the Bluetooth module cable

from the

system board.

Removing the Bluetooth Module

Bluetooth Module Spare Part Number Information

Bluetooth module (includes Bluetooth module cable)

398393-001

Summary of Contents for Compaq nw8440














































































































































































































































Search results

Summary of Contents for Compaq nw8440

Reviews:

HP Compaq nw8440, Maintenance And Service Manual, Page: 106 / 237

Search results

Summary of Contents for Compaq nw8440

Reviews: