Dial a telephone number, make sure there is a response from the remote modem, and then hang
up.
●
Set the modem to ignore dial tones.
If the modem receives a dial tone it does not recognize, it does not dial and displays a “No Dial
Tone” error message.
To set the modem to ignore all dial tones before dialing, follow these steps:
1.
Select
Start
>
Control Panel
>
Printers and Other Hardware
>
Phone and Modem
Options
.
2.
Then click the
Modems
tab.
3.
Click the listing for the modem.
4.
Click
Properties
.
5.
Click
Modem
.
6.
Clear the check box for
Wait for dial tone before dialing
.
7.
Click
OK
twice.
NOTE:
You must commit these changes in order for them to be saved. See your network
administrator for additional information.
Connecting to a local area network
Connecting to a local area network (LAN) requires an 8-pin, RJ-45 network cable (purchased
separately). If the network cable contains noise suppression circuitry
(1)
, which prevents interference
from TV and radio reception, orient the circuitry end of the cable
(2)
toward the computer.
To connect the network cable:
1.
Plug the network cable into the network jack
(1)
on the computer.
34
Chapter 7 Modem and LAN
Summary of Contents for Compaq 6720t
