HP Compaq 6720t User Manual Download Page 17

Page: 17 / 64

Component

Description

(1)

Battery bay

Holds the battery.

(2)

Battery release latches (2)

Release the battery from the battery bay.

(3)

Business card holder

Holds a standard-size business card.

(4)

Flash drive bay

Holds the flash drive.

(5)

Docking connector

Connects to an optional docking device.

(6)

Memory module compartment

Contains the memory module slot.

(7)

Vent

Enables airflow to cool internal components.

(8)

Accessory battery connector

Connects an optional accessory battery.

Wireless antennae

Wireless antennae send and receive signals from one or more wireless devices. These antennae are
not visible from the outside of the computer.

NOTE:

For optimal transmission, keep the areas immediately around the antennae free from

obstructions.

To see wireless regulatory notices, refer to the section of the

Regulatory, Safety and Environmental

Notices

that applies to your country or region. These notices are located in the printed

Getting Started

guide.

Identifying the hardware

Summary of Contents for Compaq 6720t

































































Search results

Summary of Contents for Compaq 6720t

Reviews:

Related manuals for Compaq 6720t

Brands by name

Popular brands

HP Compaq 6720t, User Manual

Search results

Summary of Contents for Compaq 6720t

Reviews:

Related manuals for Compaq 6720t

Brands by name

Popular brands