background image

S e n d   d o c u m e n t a t i o n   c o m m e n t s   t o   m d s f e e d b a c k - d o c @ c i s c o . c o m

22

Cisco MDS 9000 Family Release Notes for Cisco MDS NX-OS Release 5.2(2)

OL-25090-02

  Downgrading Your Cisco MDS SAN-OS Software Image

FICON Downgrade Paths

Table 15

 lists the downgrade paths for FICON releases. Find the image release number that you want to 

downgrade to in the 

To Release with FICON Enabled

 column of the table and follow the recommended 

downgrade path. 

Table 14

Nondisruptive Downgrade Path from NX-OS Release 5.2(2)

To NX-OS or SAN-OS 
Release

Nondisruptive Downgrade Path and Ordered Downgrade Steps

NX-OS:

Release 5.2(1)

Downgrade directly form NX-OS Release 5.2(2)

All 5.0(x) releases

Downgrade directly from NX-OS Release 5.2(2)

1,

 

2

1.

If you install a Generation 4 module in an MDS 9509 or MDS 9506 switch and perform a full switch reload following the 
installation of NX-OS Release 5.2(2), then you cannot nondisruptively download from NX-OS Release 5.2(2) to NX-OS 
5.0(x).

2.

A downgrade from NX-OS Release 5.2(2) to a release other than Release 5.2(1) disrupts and stops all FCoE traffic because 
FCoE requires Cisco NX-OS Release 5.2(x). 

All 4.2(x) and 4.1(x) 
releases

1.

Downgrade to NX-OS Release 5.0(x).

2.

Downgrade to NX-OS Release 4.2(x) or 4.1(x).

SAN-OS:

All 3.3(x) releases

1.

Downgrade to NX-OS Release 5.0(x).

2.

Downgrade to NX-OS Release 4.2(x) or Release 4.1(x).

3.

Downgrade to SAN-OS Release 3.3(x). 

All 3.2(x), 3.1(x), 
3.0(x) releases, and all 
2.1(x) releases.

1.

Downgrade to NX-OS Release 5.0(x).

2.

Downgrade to NX-OS Release 4.2(x) or Release 4.1(x).

3.

Downgrade to SAN-OS Release 3.3(x). 

4.

Downgrade to SAN-OS Release 3.2(x), Release 3.1(x)., Release 3.0(x), or 
Release 2.1(x).

 All 2.0(x) releases. 

1.

Downgrade to NX-OS Release 5.0(x).

2.

Downgrade to NX-OS Release 4.2(x) or Release 4.1(x).

3.

Downgrade to SAN-OS Release 3.3(x). 

4.

Downgrade to SAN-OS Release 2.1(2x).

5.

Downgrade to SAN-OS Release 2.0(x).

Release 1.x

1.

Downgrade to NX-OS Release 5.0(x).

2.

Downgrade to NX-OS Release 4.2(x) or Release 4.1(x).

3.

Downgrade to SAN-OS Release 3.3(x). 

4.

Downgrade to SAN-OS Release 2.1(2b).

5.

Downgrade to SAN-OS Release 1.3(4a).

6.

Downgrade to SAN-OS Release 1.x.

Summary of Contents for Cisco MDS 8/24c













































Reviews: