background image

 

Regulatory compliance notices  79 

Canadian notice (Avis Canadien) 

Class A equipment

 

This Class A digital apparatus meets all requirements of the Canadian Interference-Causing Equipment 

Regulations. 
Cet appareil numérique de la classe A respecte toutes les exigences du Règlement sur le matériel 

brouilleur du Canada. 

Class B equipment

 

This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment 

Regulations. 
Cet appareil numérique de la classe B respecte toutes les exigences du Règlement sur le matériel 

brouilleur du Canada. 

 

European Union regulatory notice 

This product complies with the following EU Directives: 

 

Low Voltage Directive 2006/95/EC 

 

EMC Directive 2004/108/EC 

Compliance with these directives implies conformity to applicable harmonized European standards 

(European Norms) which are listed on the EU Declaration of Conformity issued by Hewlett-Packard for this 

product or product family. 
This compliance is indicated by the following conformity marking placed on the product:  

 

This marking is valid for non-Telecom products and EU harmonized Telecom products (e.g. Bluetooth). 
 

 

This marking is valid for EU non-harmonized Telecom products. 
*Notified body number (used only if applicable—refer to the product label) 

Hewlett-Packard GmbH, HQ-TRE, Herrenberger Strasse 140, 71034 Boeblingen, Germany  

 

Disposal of waste equipment by users in private 

households in the European Union 

 

Summary of Contents for BL685c - ProLiant - 4 GB RAM




































































































Reviews: