The following table will translate the
zlc
output to link status.
Link Port Status
Link Speed Pause
Faults
OK
Zre
(x)
EKEY_DISA
BLED
Auto
Enable Internal Fault
EKEY_ENAB
LED
1000fd
UP
1000hd
DOWN
100fd
100hd
10fd
10hd
Disable External Fault
ON
Link:
zre(X)
– physical interface
Shelf Manager Status:
EKEY_DISABLED
- A slot or device that has been disabled by the Shelf
Manager.
EKEY_ENABLED
- A slot or device that has been enabled by the shelf
manager and enabled by the Ethernet Switch Blade
switch.
UP
– The port has been configured to be active and has established a link
with another network device.
DOWN
– The port has been configured to be active but has not establish a
link with another network device.
Link Speed:
Auto
– Auto Negotiate with the other device. The node device
must be configured to Auto Negotiate as well or network connectivity errors
will occur.
1000fd
– Full Duplex Gigabit Ethernet
1000hd
– Half Duplex Gigabit Ethernet
100fd
– Fast Ethernet Full Duplex
100hd
– Fast Ethernet Half Duplex
10fd
– Ethernet Full Duplex
Ethernet Switch Blade User's Guide
release 3.2.2j
page 166
Downloaded from
www.Manualslib.com
manuals search engine