manualshive.com logo in svg

HP bh5700, User Manual

The HP bh5700 User Manual is a comprehensive guide that provides detailed instructions and information to maximize the potential of your HP bh5700 product. Download the manual for free from our website to access valuable tips and tricks, ensuring a seamless user experience with your device.

Share
Download
background image

zmnt

NAME

zmnt

 − 

Expands the read/write files onto the RAM disk.

SYNOPSIS

zmnt [-c] <directory>

zmnt [-c] -t <file> 

zmnt [-c] –l

DESCRIPTION

zmnt

 

expands files from flash onto the RAM disk that have been previously saved with 

zsync

. 

The 

init

 process runs 

zmnt

 to expand the files in flash onto RAM file system. The user may 

use 

zmnt

 to expand the files at anytime and may place them in any directory. For example, 

zmnt

 /tmp

 

will expand the files under the directory /tmp.

Booting the kernel with 

-i

 instructs the 

init

 process to skip the 

zmnt

 stage After booting in 

this way, 

zmnt

 can be used for correcting a problem file in the read-write file system.

The 

-t

 option can be used to save the configuration of a switch to a tar file.  A tar file can be 

copied to another switch and saved with 

zsync

 

-t

.

   As a result, the configuration of a switch 

may be cloned to other switches.

The 

-c

 option is used to mount the custom overlay.  See 

zsync

 for a description of custom 

verses dynamic overlay.

OPTIONS

-c

Read saved files from the custom overlay

-t <file>

Save the overlay into the specified <file> in tar format.

<directory>

The directory under which the overlay files 

are expanded, or the file to which the tar image is saved.

-l

List files in selected overlay, do not unpack.

EXAMPLES

Ethernet Switch Blade User's Guide

release  3.2.2j

page  233

Downloaded from 

www.Manualslib.com

 

manuals search engine

 

Summary of Contents for bh5700








































































































































































































































































































































































Reviews:

No comments

Related manuals for bh5700

Balluff BNI IOL-727-S51-P012 Assembly Instructions Manual preview
BNI IOL-727-S51-P012
Brand: Balluff Pages: 20
LaCie 1big Dock SSD Pro Quick Install Manual preview
1big Dock SSD Pro
Brand: LaCie Pages: 28
BeeSecure BEE-REPEATER Quick Start Manual preview
BEE-REPEATER
Brand: BeeSecure Pages: 35
ATZ HDMI-161SM Manual preview
HDMI-161SM
Brand: ATZ Pages: 8
Gefen EXT-DVIKVM-441DL User Manual preview
EXT-DVIKVM-441DL
Brand: Gefen Pages: 32
IOGear GUH420 Quick Start Manual preview
GUH420
Brand: IOGear Pages: 1
Mellanox Technologies MIS5023 Dismantling Manual preview
MIS5023
Brand: Mellanox Technologies Pages: 12
ATEN KVMP CS1782A Quick Start Manual preview
KVMP CS1782A
Brand: ATEN Pages: 2
Eaton RMQ-Titan M22-LED Series Instruction Leaflet preview
RMQ-Titan M22-LED Series
Brand: Eaton Pages: 4
Microsens MS650850M Application preview
MS650850M
Brand: Microsens Pages: 8
KanexPro HDMX44A-18G Operation Manual preview
HDMX44A-18G
Brand: KanexPro Pages: 35
C&C TECHNIC VAX-8204F User Manual preview
VAX-8204F
Brand: C&C TECHNIC Pages: 2
KinAn DV2302 User Manual preview
DV2302
Brand: KinAn Pages: 5
Zektor HD800-V2 User Manual preview
HD800-V2
Brand: Zektor Pages: 41
Hailink MX44NN00RK User Manual preview
MX44NN00RK
Brand: Hailink Pages: 6
HB Products HBSC2-SSR Instruction Manual preview
HBSC2-SSR
Brand: HB Products Pages: 6
SOFLY HDSW4 User Manual preview
HDSW4
Brand: SOFLY Pages: 4
Radiient Select-4 User Manual preview
Select-4
Brand: Radiient Pages: 4

Brands by name

Popular brands

Load more brands