manualshive.com logo in svg

HP bh5700, User Manual

The HP bh5700 User Manual is a comprehensive guide that provides detailed instructions and information to maximize the potential of your HP bh5700 product. Download the manual for free from our website to access valuable tips and tricks, ensuring a seamless user experience with your device.

Share
Download
background image

/sbin/rpc.statd

/usr/sbin/rpc.mountd -r

Once the above servers are started, you can mount a remote NFS file system.

mount rhost:nfs_file_system local_mount_point

If the remote NFS file system you’re mounting is on an OA switch, you should mount with 
caching disabled. 

mount rhost:nfs_file_system –o noac local_mount_point

All the necessary servers are included in 

/etc/init.d/rcS

 but are commented out by default. 

To automatically start all NFS client services each time you boot, uncomment the NFS Client 
servers. Go to the 

/etc/init.d/rcS

 file. Uncomment the following command lines by 

removing the 

#

 sign.

/sbin/portmap

/sbin/rpc.statd

/usr/sbin/rpc.mountd -r

You can also include commands to mount remote NFS file systems at boot time. There is an 
example line included at the appropriate location in 

/etc/init.d/rcS

. Uncomment and alter 

the mount command included for your particular configuration. 

NOTE: A “sleep” of 5 seconds is included to allow time for the links to come up prior to 
attempting the mount.

sleep 5

mount 10.0.0.1:/nfs –t nfs –o noac /mnt

NFS Server Configuration

The switch also contains an NFS server so that you can mount the switch file system from other 
systems. To enable the NFS server, first follow the steps to enable the NFS client. Then, edit 

/etc/exports

 to include the file systems you wish to export. Consult a standard Linux Network 

Administrator’s Guide (or man pages) regarding options for exported file systems. Generally, an 

entry in 

/etc/exports

 looks like the following:

/nfs

*.localdomain.com(ro)

Ethernet Switch Blade User's Guide

release  3.2.2j

page 76

Downloaded from 

www.Manualslib.com

 

manuals search engine

 

Summary of Contents for bh5700








































































































































































































































































































































































Reviews:

No comments

Related manuals for bh5700

Cabletron Systems SmartSwitch 9A100 Installation And Setup Manual preview
SmartSwitch 9A100
Brand: Cabletron Systems Pages: 52
Cabletron Systems SmartSwitch 9W006 Quick Start Manual preview
SmartSwitch 9W006
Brand: Cabletron Systems Pages: 34
Cabletron Systems SmartSTACK ELS100-S24TX2M Management Manual preview
SmartSTACK ELS100-S24TX2M
Brand: Cabletron Systems Pages: 102
Cabletron Systems 9A426-01 Appendix preview
9A426-01
Brand: Cabletron Systems Pages: 24
Cabletron Systems SmartSwitch 9000 Appendix preview
SmartSwitch 9000
Brand: Cabletron Systems Pages: 14
Cabletron Systems MicroMMAC 22ES Reference Manual preview
MicroMMAC 22ES
Brand: Cabletron Systems Pages: 38
Field Controls 46112100 Manual preview
46112100
Brand: Field Controls Pages: 4
Grozone Control OSWDN User Manual preview
OSWDN
Brand: Grozone Control Pages: 20
Comtech EF Data CRS-280 Installation And Operation Manual preview
CRS-280
Brand: Comtech EF Data Pages: 70
Pathway connectivity solutions 6716 User Manual preview
6716
Brand: Pathway connectivity solutions Pages: 34
nedis VMAT3482AT Manual preview
VMAT3482AT
Brand: nedis Pages: 24
Lindy 32320 User Manual preview
32320
Brand: Lindy Pages: 12
Kensence S-Mix-Pro 18*18 Operation Manual preview
S-Mix-Pro 18*18
Brand: Kensence Pages: 24
ANTAIRA LMX-2602G-SFP Series Hardware Manual preview
LMX-2602G-SFP Series
Brand: ANTAIRA Pages: 19
3Com 3CRDSF9PWR-US - OfficeConnect Managed Fast Ethernet PoE... User Manual preview
3CRDSF9PWR-US - OfficeConnect Managed Fast Ethernet PoE...
Brand: 3Com Pages: 256
Enterasys VH-8G-L3 User Manual preview
VH-8G-L3
Brand: Enterasys Pages: 41
Little Giant RS-5 Instruction Sheet preview
RS-5
Brand: Little Giant Pages: 8
H3C S5130-EI Series Manual preview
S5130-EI Series
Brand: H3C Pages: 32

Brands by name

Popular brands

Load more brands