HP AlphaServer ES47 Installation Manual Download Page 75

Page: 75 / 76

5.5

De-Installing Q-Vet

De-installation of Q-Vet differs between operating systems. You must de-install Q-Vet
from each partition in the system. Failure to do so may result in the loss of customer
data at a later date if Q-Vet is misused.

Follow the instructions listed under your operating system to de-install Q-Vet from a
partition. The

qvet_uninstall

programs will remove the Q-Vet supplied tools and restore

the original system tuning/configuration settings.

5.5.1

Tru64 UNIX

Command Q-Vet to

Stop, Terminate, and Exit.

Execute the command

qvet_uninstall

which will remove Q-Vet and restore

the system configuration/tuning file

sysconfigtab

Note: log files are retained in

/usr/field/tool_logs

Reboot the system. (You must reboot, even if you decide to reinstall Q-Vet. If you
do not reboot tuning configurations may not be set properly.)

5.5.2

OpenVMS

Command Q-Vet to

Stop, Terminate, and Exit.

Execute the command

@sys$manager:qvet_uninstall.

This will remove Q-Vet

and restore system tuning (

modparams.dat

) and the original

UAF

settings.

Note: log files are retained in

sys$specific:[sysmgr.tool_logs]

Reboot the system. (You must reboot even if you decide to reinstall Q-Vet. If you
do not reboot tuning configurations may not be set properly.)

5.5.3

Q-Vet Resources

•

Release notes and kits are available from the Q-Vet web page:
http://cisweb.mro.cpqcorp.net/projects/qvet/

•

Training may be found at:
http://learning1.americas.cpqcorp.net/wbt/cs127a-ewb/welcome.htm

•

A description of the IVP may be found at:
http://cisweb.mro.cpqcorp.net/projects/qvet/IVP_description.html

Verify with Q-Vet 5-9

Summary of Contents for AlphaServer ES47













































































Search results

Summary of Contents for AlphaServer ES47

Reviews:

Related manuals for AlphaServer ES47

Brands by name

Popular brands

HP AlphaServer ES47, Installation Manual

Search results

Summary of Contents for AlphaServer ES47

Reviews:

Related manuals for AlphaServer ES47

Brands by name

Popular brands