5
Starting and Configuring the Router
You can use only the console port to make initial configuration of the device.
For a device configured with two RPE-X1s in Slot 4 and Slot 5, the RPE-X1 installed in Slot 5
serves as the active RPE-X1 by default.
For a device configured with two RSE-X1s in Slot 5 and Slot 6, the RSE-X1 installed in Slot 5
serves as the active RSE-X1 by default.
Through active/standby switchover, the original active MPU serves as the standby MPU, and
vice versa. For more information, refer to “Switchover between the active and standby MPUs” in
Chapter 1 “Router Overview."
You can perform operations and configurations only on the active MPU.
The startup and configuration processes of a device installed with an RPE-X1 or RSE-X1 are
similar. A device configured with an RPE-X1 is used in the examples in this chapter.
Setting Up a Configuration Environment
Connecting the Router to a Configuration Terminal
For how to connect the router to a configuration terminal, refer to “Connecting the Console
Cable” in Chapter 4 “Installing the Router."
Setting the Parameters for the Console Terminal
Step1
Create a HyperTerminal connection. Select
Start
>
Programs
>
Accessories
>
Communications
>
HyperTerminal
, and enter a connection name in the
Connection
Description
dialog box, as shown below.
Figure 5-1
Create a connection
Step2
Select a connection port. Select a serial port from the
Connect using
drop-down list in the
Connect To
dialog box as shown below. Be sure to select the serial port to which the console
cable is actually connected.
Summary of Contents for A6616
Page 1: ...HP A6616 Router Installation Manual ...
Page 47: ......