FIP-110
Introduction
The FIP-110 supports MIMs only. It provides high-density narrowband aggregation, and hence
can protect legacy investment. The FIP-110 supports four MIMs at the same time.
Figure 1-17
Front view of the FIP-110
(1) Slot 1
(2) Slot 2
(3) Slot 3
(4) Slot 4
(5) OPEN BOOK sign
(6) Combo interface 0
(7) Combo interface 1
"OPEN BOOK" sign – Refer to related sections when performing the following operations:
Operation
Reference
Plug/unplug a FIP-110
“Installing and Removing a FIP” in Chapter 4 “Installing the Router”
Plug/unplug a MIM
“Installing and Removing a MIM” in Chapter 4 “Installing the Router”
Connect an Ethernet cable
“Connecting the Management Ethernet Interface” and “Connecting
Ethernet Cables” in Chapter 4 “Installing the Router”
Plug/unplug an optical fiber
“Connecting an optical Ethernet interface” in Chapter 4 “Installing the
Router”
Technical specifications
Table 1-20
Technical specifications for the FIP-110
Item
Specification
Processor
MIPS 1 GHz
Processor cores
2
Flash
4 MB
Memory type and size
DDR2 SDRAM
1 GB (default, one 1 GB memory module)
2 GB (maximum)
NVRAM
128 KB
Combo interfaces
2
2 electrical interfaces
(automatic MDI/MDIX)
10 Mbps, half/full-duplex
100 Mbps, half/full-duplex
1000 Mbps, full-duplex
2 optical interfaces
1000 Mbps, full-duplex
HIM
Not supported
Summary of Contents for A6616
Page 1: ...HP A6616 Router Installation Manual ...
Page 47: ......
