HP A10500 Series Installation Manual Download

Page: 76 / 104

MPU active/standby status LED

The LSU1SUPA0 MPU has one ACTIVE LED to indicate the active or standby status of the MPU.

Table 41

MPU ACTIVE LED description

LED LED

status Description

ACTIVE

The MPU is active.

Off

•

The MPU is in standby status.

•

The MPU is faulty. Check the card LED for an MPU problem.

LPU LEDs

RJ-45 Ethernet port LED

The LPUs provide RJ-45 Ethernet port LEDs to indicate the link status and data receiving/forwarding

status of the Ethernet ports.

Table 42

RJ-45 Ethernet port LED description

LED LED

status

Description

RJ-45 Ethernet port LED

Flashing

The Ethernet interface is receiving or sending data.

A link is present.

Off

No link is present.

SFP port LED

The LPUs provide one SFP port LED for each SFP port to indicate the link status and data

receiving/forwarding status of the SFP ports.

Table 43

SFP port LED description

LED LED

status

Description

SFP port LED

Flashing

The SFP port is receiving or sending data.

A link is present.

Off

No link is present.

SFP+ port LED

The LPUs provide one SFP+ port LED for each SFP+ port to indicate the link status and data

receiving/forwarding status of the SFP+ ports.

Table 44

SFP+ port LED description

LED LED

status Description

SFP+ port LED

Flashing

The SFP+ port is receiving or sending data.

A link is present.

Off

No link is present.

Summary of Contents for A10500 Series









































































































Search results

Summary of Contents for A10500 Series

Reviews:

Related manuals for A10500 Series

Brands by name

Popular brands

HP A10500 Series, Installation Manual

Search results

Summary of Contents for A10500 Series

Reviews:

Related manuals for A10500 Series

Brands by name

Popular brands