60
Appendix B FRUs and compatibility matrixes
MPUs
The MPU is the core of the control management plane for the switch. The switch supports the MPU
LSU1SUPA0.
Table 27
LSU1SUPA0 supervisor engine specifications
Item LSU1SUPA0
supervisor engine
Interfaces
•
One console port for local or remote dialup configuration management
•
One 10/100/1000BASE-T interface for management and upgrade
Interface transmission
rate
•
Console port: no greater than 115200 bps and defaults to 9600 bps
•
10/100/1000BASE-T interface: 10/100/1000 Mbps, half/full duplex
Cables and max
transmission distance
•
Console port: 15 m (49.21 ft) over common asynchronous serial interface
cable
•
10/100/1000BASE-T interface: 100 m (328.08 ft) over Category-5 twisted
pairs
MPUs are ordered separately. A switch requires one MPU to operate normally. You can also install two
MPUs in a switch for redundancy.
LPUs
The LPUs in
Table 28
apply to all the switches in this series.
Table 28
LPU specifications
LPU model Description
Connector
Number
of
interfaces
Interface
transmission rate
Available
transceiver
modules
LSU1TGS1
6SC0
16-port 10-
Gigabit SFP+
optical Ethernet
interface card
LC
16
10 Gbps, 1 Gbps
•
10-Gigabit SFP+
module
•
10-Gigabit SFP+
cable
•
Gigabit SFP
module
