Encore Networks BANDIT II C2C, Manual

Page: 1 / 8

encor etworks
TM
e n
!
•
For information on trademarks, safety, limitations of
liability, and similar topics, see
http://www.encorenetworks.com/disclaimer.htm .
Using a Three-Pronged DC Power Connector
with a BANDIT II C2C
his document describes assembly and use of a three-pronged DC power connector for
Encore Networks, Inc.’s family of BANDIT™ chassis. The steps also include connection to
AC power, for review.
The three-pronged DC connector is used in the following BANDIT chassis.
• BANDIT II chassis (DC model)
• BANDIT II C2C chassis (DC model)
Caution: If you have a BANDIT chassis that can use both DC and AC power, it is important
to follow these steps to connect all power sources to that chassis.
If you ordered a BANDIT chassis that uses a three-pronged connector for DC input power, the
package includes a three-pronged DC power connection set (
Figure 3-1 , Figure 3-2 , and
Figure 3-3 )
Figure 3-1. Top Section of Three-Pronged Connector Shell
T
!
Home Module: BANDIT II C2C
Document 3
Version A, January 2012
© 2012 Encore Networks, Inc.
All rights reserved.
Module TOC