HP 68000 Series User Manual Download Page 530

Page: 530 / 586

Environment Variable Expansion

Operating system environment variables will now be expanded when they
appear in a debugger command.

For example, "Debugger Directory Change_working $H OME/test" will now
work as expected.

Target Program Function Calls

You may now reference target program functions in C expressions.

Target and debugger variables may be passed by value, and target variables
may be passed by reference.

C+ + Support

The debugger now supports C+ + name mangling/de-mangling and
object/instance breakpoints for the Microtec R esearch Inc. C+ + compiler.

Simulated I/O Changes

The debugger’s simulated I/O features are now compatible with the emulation
interface’s simulated I/O.

Simulated I/O in the debugger/emulator now requires the setting up of
simulated I/O polling and addresses in the emulator configuration.

The I/O R eport no longer reports on processes used.

The keyboard EOF function is no longer supported since it is not supported
by the emulation interface’s I/O.

Chapter 13: Debugger Versions

508

Summary of Contents for 68000 Series











































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 68000 Series

Reviews:

Brands by name

Popular brands

HP 68000 Series, User Manual

Search results

Summary of Contents for 68000 Series

Reviews:

Brands by name

Popular brands