CAUTION:
To prevent damage to the memory module, hold the memory module by the edges
only. Do not touch the components on the memory module.
a.
Align the notched edge
(1)
of the memory module with the tab in the memory module slot.
b.
With the memory module at a 45-degree angle from the surface of the memory module
compartment, press the module
(2)
into the memory module slot until it is seated.
c.
Gently press the memory module
(3)
down, applying pressure to both the left and right edges
of the memory module, until the retention clips snap into place.
CAUTION:
To prevent damage to the memory module, be sure that you do not bend the
memory module.
9.
Lower the regulatory label to cover the memory modules.
10.
Reinstall the service cover by inserting the cover at an angle
(1)
.
11.
Align the snap locations on the service cover.
36
Chapter 6 Maintenance
Summary of Contents for 649932-001
