HP 64146A, User Manual

Page: 52 / 112

The resulting display shows MVN instruction moves the "THIS IS
MESSAGE A" message to the destination locations.
To list the previous lines of the trace, press the <PGUP> or <PREV>
key.
Displaying Trace with
Time Count Absolute
Enter the following command to display count information relative to
the trigger state.
display trace count absolute <RETURN>
Trace List Offset=0
Label: Address Data Opcode or Status time count
Base: symbols hex mnemonic w/symbols relative
+015 :c000002 5448 xx48H data write mx 4.00 uS
+016 :c000002 5349 5349H data read mx 8.00 uS
+017 :c000003 4949 49xxH data write mx 8.00 uS
+018 :c000004 4953 xx53H data write mx 4.00 uS
+019 :c000004 4920 4920H data read mx 8.00 uS
+020 :c000005 2020 20xxH data write mx 8.00 uS
+021 :c000006 2049 xx49H data write mx 4.00 uS
+022 :c000006 2053 2053H data read mx 8.00 uS
+023 :c000007 5353 53xxH data write mx 8.00 uS
+024 :c000008 5320 xx20H data write mx 4.00 uS
+025 :c000008 454D 454DH data read mx 8.00 uS
+026 :c000009 4D4D 4DxxH data write mx 8.00 uS
+027 :c00000A 4D45 xx45H data write mx 4.00 uS
+028 :c00000A 5353 5353H data read mx 8.00 uS
+029 :c00000B 5353 53xxH data write mx 8.00 uS
STATUS: M37700--Running user program Emulation trace complete______........
display trace
run trace step display modify break end ---ETC--
2-28 Getting Started