HP 64146A, User Manual

Page: 35 / 112

Pod Command Help
To access the emulator’s firmware resident Terminal Interface help
information, you can use the following commands.
display pod_command <RETURN>
pod_command ’help m’ <RETURN>
The command enclosed in string delimiters (", ’, or ^) is any Terminal
Interface command, and the output of that command is seen in the
pod_command display. The Terminal Interface help (or ?) command
may be used to provide information on any Terminal Interface
command or any of the emulator configuration options (as the example
command above shows).
Pod Commands
Time Command
10:00:00 help m
m - display or modify processor memory space
m <addr> - display memory at address
m -d<dtype> <addr> - display memory at address with display option
m <addr>..<addr> - display memory in specified address range
m -dm <addr>..<addr> - display memory mnemonics in specified range
m <addr>.. - display 128 byte block starting at address A
m <addr>=<value> - modify memory at address to <value>
m -d<dtype> <addr>=<value> - modify memory with display option
m <addr>=<value>,<value> - modify memory to data sequence
m <addr>..<addr>=<value>,<value> - fill range with repeating sequence
--- VALID <dtype> MODE OPTIONS ---
b - display size is 1 byte(s)
w - display size is 2 byte(s)
m - display processor mnemonics
STATUS: M37700--Running in monitor____________________________________........
run trace step display modify break end ---ETC--
Getting Started 2-11