manualshive.com logo in svg

HP 64146A, User Manual

Share
Download
HP 64146A User Manual Download Page 33

For more information on creating measurements systems, refer to the
Softkey Interface Reference manual.

From the HP-UX Shell

If /usr/hp64000/bin is specified in your PATH environment variable,
you can also enter the Softkey Interface with the following command.

$ emul700 <emul_name> <RETURN>

The "emul_name" in the command above is the logical emulator name
given in the HP 64700 emulator device table
(/usr/hp64000/etc/64700tab).

If this command is successful, you will see a display similar to Figure
2-4.  The status message shows that the default configuration file has
been loaded.  If the command is not successful, you will be given an
error message and returned to the HP-UX prompt.  Error messages are
described in the Softkey Interface Reference manual.

                            HPB64146-19003 A.04.00  20Aug92
                             M37700 EMULATION SERIES 64700

                          A Hewlett-Packard Software Product
                          Copyright Hewlett-Packard Co. 1992

      All Rights Reserved. Reproduction, adaptation, or translationwithout prior
      written  permission  is prohibited, except as allowed undercopyright laws.

                               RESTRICTED RIGHTS LEGEND

         Use , duplication , or disclosure  by the  Government is subject to
         restrictions as set forth in subparagraph (c) (1) (II) ofthe Rights
         in Technical Data and Computer Software clause at DFARS52.227-7013.
         HEWLETT-PACKARD Company , 3000 Hanover St. , Palo Alto, CA94304-1181

    STATUS:   Loaded configuration file____________________________________...R....

      run     trace     step   display           modify   break    end    ---ETC--

Figure 2-4. Softkey Interface Display

Getting Started  2-9

Summary of Contents for 64146A

















































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands