Menu item
Sub-menu item
Sub-menu item
Values and Description
Yes
: Print the results.
No
(default): Do not print the results.
Execute
Run the ping test.
No
(default): Do not run the test.
Yes
: Run the test
Ping Results
View the ping test status and results, using the control
panel display.
Packets Sent
Number of packets (0 - 65535) sent to the remote host
since the most recent test was initiated or completed.
Packets Received
Number of packets (0 - 65535) received from the
remote host since the most recent test was initiated or
completed.
Percent Lost
Percent of sent ping test packets without a response
from the remote host since the most recent test was
initiated or completed.
RTT Min
Minimum detected round trip time (RTT), from 0 to
4096 milliseconds, for packet transmission and
response.
RTT Max
Shows the maximum detected round trip time (RTT),
from 0 to 4096 milliseconds, for packet transmission
and response.
RTT Average
Average RTT, from 0 to 4096 milliseconds, for packet
transmission and response.
Ping in Progress
Yes
a test is in progress.
No
a test completed or is not
running.
Refresh
Update the ping test data with current results.
Yes
: Update the data.
No
: Maintain the existing data. (Automatically
refreshes when the menu times out or you manually
return to the main menu.)
Link Speed
Set the print server's link speed. The available settings
depend on the device and installed print server. Select
one of the following modes:
Auto
(default): Use auto-negotiation to configure the
highest link speed and communication mode allowed.
If auto-negotiation fails, either 100TX HALF or 10TX
HALF is set depending on the detected link speed of
the hub/switch port. (A 1000T half-duplex selection is
not supported.)
10T Half
: 10 Mbps, half-duplex operation.
10T Full
: 10 Mbps, full-duplex operation.
100TX Half
: 100 Mbps, half-duplex operation.
100TX Full
: 100 Mbps, full-duplex operation.
Table C-1
HP Jetdirect EIO Menu on Graphical Control Panel (continued)
ENWW
Graphical control panel menus 175
Summary of Contents for 630n - JetDirect Gigabit EN Print Server
