Other Settings
Use this tab to provide access to a variety of management and printing configuration options. The
following tabs are discussed:
●
Misc. Settings on page 79
Enable miscellaneous advanced protocols and functions
●
Firmware Upgrade on page 81
Update your HP Jetdirect print server with new features and
enhancements
●
LPD Queues on page 81
Set up print queues used in printing with line printer daemon (LPD)
printing services
●
USB Settings on page 83
(External print servers only.) Configure USB connection parameters
●
Support Info on page 84
Set up the
Support
link located under
Other Links
in the left margin
●
Refresh Rate on page 84
Set the time interval (in seconds) for embedded Web server diagnostic
page updates
Misc. Settings
Use the
Misc. Settings
tab to set a variety of advanced protocols and features, as described in
Table
4-13 Miscellaneous Settings on page 79
.
Table 4-13
Miscellaneous Settings
Item
Description
SLP Config
Enable SLP, which is used by certain client application software to automatically discover
and identify the HP Jetdirect print server.
If SLP uses multicast protocols, you must enable Multicast IPv4.
Telnet Config
Use Telnet to access to HP Jetdirect configuration parameters. For more information, see
TCP/IP configuration on page 15
.
Bonjour
Use Bonjour services (formerly listed as Multicast Domain Name System [mDNS]
services). Bonjour is typically used for IP address and name resolution (through UDP port
5353) where a conventional DNS server is not used.
For Bonjour operation, you must enable Multicast IPv4.
Multicast IPv4
Use the receipt and transmission of IP version 4 multicast packets by the print server.
NOTE:
If disabled, other protocols that use multicast protocols, such as Bonjour and SLP,
might also be disabled.
9100 Config
Use port 9100 services. This is an HP-proprietary raw TCP/IP port on the HP Jetdirect print
server and is the default port for printing. It is accessed by HP software, such as the HP
Standard Port.
FTP Printing
Use FTP services available on the HP Jetdirect print server for printing. For more
information, see
FTP printing on page 165
.
LPD Printing
Use LPD services on the HP Jetdirect print server. LPD provides line printer spooling
services for TCP/IP systems. For more information, see
LPD printing on page 155
.
IPP Printing
Use IPP on the HP Jetdirect print server. If the printer is properly connected and accessible,
IPP allows printing to this device over the Internet (or intranet). A properly configured IPP
client system is also required. For information on IPP client software, see
HP software
solutions summary on page 7
.
ENWW
Networking tab
79
Summary of Contents for 630n - JetDirect Gigabit EN Print Server
