225
Step Command
Remarks
4.
Set the minimum password
length.
password-control length
length
Optional.
10 characters by default.
5.
Configure the password
composition policy.
password-control composition
type-number
type-number
[
type-length
type-length
]
Optional.
•
In non-FIPS mode, by default, a
password must contain at least
one type of characters and
each type must contain at least
one character.
•
In FIPS mode, by default, a
password must contain four
types of characters and each
type must contain at least one
character.
6.
Configure the password
complexity checking policy.
password-control complexity
{
same-character
|
user-name
}
check
Optional.
By default, the system does not
perform password complexity
checking.
7.
Set the maximum number of
history password records for
each user.
password-control history
max-record-num
Optional.
4 by default.
8.
Specify the maximum number
of login attempts and the
action to be taken when a
user fails to log in after the
specified number of attempts.
password-control login-attempt
login-times
[
exceed
{
lock
|
unlock
| lock-time
time
} ]
Optional.
By default, the maximum number
of login attempts is 3 and a user
failing to log in after the specified
number of attempts must wait for
one minute before trying again.
9.
Set the number of days during
which the user is warned of
the pending password
expiration.
password-control
alert-before-expire
alert-time
Optional.
7 days by default.
10.
Set the maximum number of
days and maximum number
of times that a user can log in
after the password expires.
password-control
expired-user-login delay
delay
times
times
Optional.
By default, a user can log in three
times within 30 days after the
password expires.
11.
Set the authentication timeout
time.
password-control
authentication-timeout
authentication-timeout
Optional.
60 seconds by default.
12.
Set the maximum account idle
time.
password-control login idle-time
idle-time
Optional.
90 days by default.
NOTE:
The
password-control login-attempt
command takes effect immediately and can affect the users already
in the password control blacklist. Other password control configurations do not take effect for users that
have been logged in or passwords that have been configured.
Setting user group password control parameters
