174
•
Enter the start IP address and end IP address of the IP group. Make sure that the host IP address is
in the IP group.
•
Select a service group. By default, the group
Ungrouped
is used.
•
Select the IP group type
Normal
.
Figure 64
Adding an IP address group
# Add a portal device.
Select
User Access Manager
>
Portal Service Management
>
Device
from the navigation tree to enter the
portal device configuration page. Then, click
Add
to enter the page shown in
.
•
Enter the device name
NAS
.
•
Enter the IP address of the switch's interface connected to the user.
•
Enter the key, which must be the same as that configured on the switch.
•
Set whether to enable IP address reallocation. This example uses direct portal authentication, and
therefore select
No
from the
Reallocate IP
list.
•
Set whether to support the portal server heartbeat and user heartbeat functions. In this example,
select
Yes
for both
Support Server Heartbeat
and
Support User Heartbeat
.
Figure 65
Adding a portal device
