44
Appendix B FRUs
The HP 5130-24G-SFP-4SFP+ EI switch provides two power supply slots. One power supply can meet the
power requirement of the switch. You can install two power supplies on the switch for redundancy.
Table
11
describes the power supplies available for the HP 5130-24G-SFP-4SFP+ EI switch.
Table 11
Power supplies available for the HP 5130-24G-SFP-4SFP+ EI switch
Power supply model
Item
Specification
Remarks
PSR150-A1
Rated input voltage
100 VAC to 240 VAC @
50 Hz or 60 Hz
For more information
about the power supplies,
see
HP PSR150-A &
PSR150-D Power Supplies
User Guide.
Max input voltage
90 VAC to 264 VAC @ 47
Hz to 63 Hz
Max output power
150 W
PSR150-D1
Rated input voltage
–48 VDC to –60 VDC
Max input voltage
–36 VDC to –72 VDC
Max output power
150 W
When two power supplies are installed, you can hot-swap a power supply. To avoid device damage and
bodily injury, follow the procedures in
Figure 17
and
Figure 18
to install and remove the power supply.
