manualshive.com logo in svg

HP 5120 EI Series, Configuration Manual

The HP 5120 EI Series offers a range of advanced network switches with high performance and reliability. With its extensive features and capabilities, this product is ideal for various networking needs. You can easily access the detailed specifications and user manual for free download from manualshive.com, ensuring seamless configuration and operation.

Share
Download
background image

 

85 

 

1.

 

Configure the 802.1X client. If iNode is used, do not select the 

Carry version info

 option in the 

client configuration. (Details not shown) 

2.

 

Configure the RADIUS servers and add user accounts for the 802.1X users. (Details not shown) 

3.

 

Configure user accounts for the 802.1X users on the access device.  

#  Add  a  local  user  with  the  username 

localuser

,  and  password 

localpass

  in  plaintext.  (Make  sure  the 

username and password are the same as those configured on the RADIUS server.) 

<Device> system-view 

[Device] local-user localuser 

[Device-luser-localuser] service-type lan-access 

[Device-luser-localuser] password simple localpass 

# Configure the idle cut function to log off any online user that has been idled for 20 minutes. 

[Device-luser-localuser] authorization-attribute idle-cut 20 

[Device-luser-localuser] quit 

4.

 

Configure a RADIUS scheme. 

# Create the RADIUS scheme 

radius1

 and enter its view. 

[Device] radius scheme radius1 

# Specify the IP addresses of the primary authentication and accounting RADIUS servers. 

[Device-radius-radius1] primary authentication 10.1.1.1 

[Device-radius-radius1] primary accounting 10.1.1.1 

# Configure the IP addresses of the secondary authentication and accounting RADIUS servers. 

[Device-radius-radius1] secondary authentication 10.1.1.2 

[Device-radius-radius1] secondary accounting 10.1.1.2 

# Specify the shared key between the access device and the authentication server. 

[Device-radius-radius1] key authentication name 

# Specify the shared key between the access device and the accounting server. 

[Device-radius-radius1] key accounting money 

# Exclude the ISP domain name from the username sent to the RADIUS servers. 

[Device-radius-radius1] user-name-format without-domain 

[Device-radius-radius1] quit 

 

 

NOTE: 

The access device must use the same username format as the RADIUS server. If the RADIUS server 
includes the ISP domain name in the username, so must the access device. 

 

5.

 

Configure the ISP domain. 

# Create the ISP domain 

aabbcc.net 

and enter its view. 

[Device] domain aabbcc.net 

#  Apply  the  RADIUS  scheme 

radius1

  to  the  ISP  domain,  and  specify  local  authentication  as  the 

secondary authentication method. 

[Device-isp-aabbcc.net] authentication lan-access radius-scheme radius1 local 

[Device-isp-aabbcc.net] authorization lan-access radius-scheme radius1 local 

[Device-isp-aabbcc.net] accounting lan-access radius-scheme radius1 local 

# Set the maximum number of concurrent users in the domain to 30. 

Summary of Contents for 5120 EI Series

















































































































































































































































































































Reviews:

No comments

Related manuals for 5120 EI Series

ABB RELION REF615R Manual preview
RELION REF615R
Brand: ABB Pages: 66
Aastra CNX Product Brief preview
CNX
Brand: Aastra Pages: 2
Qlogic SANbox 6142 Supplementary Manual preview
SANbox 6142
Brand: Qlogic Pages: 2
Qlogic iSR6142 User Manual preview
iSR6142
Brand: Qlogic Pages: 172
Raritan DOMINION SX - Quick Setup Manual preview
DOMINION SX -
Brand: Raritan Pages: 4
LGC wireless InterReach Fusion SingleStar Installation And Operation Manual preview
InterReach Fusion SingleStar
Brand: LGC wireless Pages: 154
Kanguru Data Bank User Manual preview
Data Bank
Brand: Kanguru Pages: 13
B&B Electronics RS-232/422/485 Serial Card CE 3PXCC4A User Manual preview
RS-232/422/485 Serial Card CE 3PXCC4A
Brand: B&B Electronics Pages: 47
Xantech CC12 Installation Instructions preview
CC12
Brand: Xantech Pages: 4
Juniper E SERIES BROADBAND SERVICES ROUTERS 11.3.X - ERX MODULE GUIDE REV 27-9-2010 Manual preview
E SERIES BROADBAND SERVICES ROUTERS 11.3.X - ERX MODULE GUIDE REV 27-9-2010
Brand: Juniper Pages: 122
Paradyne MIM-4000F Installation Instructions Manual preview
MIM-4000F
Brand: Paradyne Pages: 6
Lanner ECA-4027 User Manual preview
ECA-4027
Brand: Lanner Pages: 99
NetComm Dynalink 3G8WV Setup Manual preview
Dynalink 3G8WV
Brand: NetComm Pages: 34
Socket Go Wi-Fi! P322 User Manual preview
Go Wi-Fi! P322
Brand: Socket Pages: 18
TP-Link TD-8840 User Manual preview
TD-8840
Brand: TP-Link Pages: 25
ADTRAN NetVanta 4430 Quick Start preview
NetVanta 4430
Brand: ADTRAN Pages: 4
Airaya AI108-1-050 Quick Install Manual preview
AI108-1-050
Brand: Airaya Pages: 28
Cambium Networks PMP 450i User Manual preview
PMP 450i
Brand: Cambium Networks Pages: 172

Brands by name

Popular brands

Load more brands