HP 5120 EI Series Configuration Manual Download Page 217

Page: 217 / 304

207



Use the

ping

command to check that the RA server is reachable.



Specify the authority for certificate request.



Configure the required entity DN parameters.

Failed to retrieve CRLs

Symptom

Failed to retrieve CRLs.

Analysis

Possible reasons include:



The network connection is not proper. For example, the network cable might be damaged or loose.



No CA certificate has been retrieved before you try to retrieve CRLs.



The IP address of LDAP server is not configured.



The CRL distribution URL is not configured.



The LDAP server version is wrong.

Solution



Make sure that the network connection is physically proper.



Retrieve a CA certificate.



Specify the IP address of the LDAP server.



Specify the CRL distribution URL.



Re-configure the LDAP version.

Summary of Contents for 5120 EI Series

















































































































































































































































































































Search results

Summary of Contents for 5120 EI Series

Reviews:

Related manuals for 5120 EI Series

Brands by name

Popular brands

HP 5120 EI Series, Configuration Manual

Search results

Summary of Contents for 5120 EI Series

Reviews:

Related manuals for 5120 EI Series

Brands by name

Popular brands