HP 5120 EI Series Configuration Manual Download Page 254

Page: 254 / 304

244



Configure Device to work as the HTTPS server and request a certificate for Device.



Request a certificate for Host so that Device can authenticate the identity of Host.



Configure a CA server to issue certificates to Device and Host.

NOTE:



In this example, Windows Server works as the CA server and the Simple Certificate Enrollment Protocol (SCEP)
plug-in is installed on the CA server.



Before performing the following configurations, ensure that the device, the host, and the CA server can reach
each other.

Figure 74

Network diagram for SSL server policy configuration

10.1.1.1/24

10.1.2.1/24

Host

10.1.1.2/24

10.1.2.2/24

Device

Configuration procedure

Configure the HTTPS server (Device)

# Create a PKI entity named

, and configure the common name as

http-server1

and the FQDN as

ssl.security.com

<Device> system-view

[Device] pki entity en

[Device-pki-entity-en] common-name http-server1

[Device-pki-entity-en] fqdn ssl.security.com

[Device-pki-entity-en] quit

# Create PKI domain

, specify the trusted CA as

ca server

, the URL of the registration server as

http://10.1.2.2/certsrv/mscep/mscep.dll

, the authority for certificate request as RA, and the entity for

certificate request as

[Device] pki domain 1

[Device-pki-domain-1] ca identifier ca server

[Device-pki-domain-1] certificate request url http://10.1.2.2/certsrv/mscep/mscep.dll

[Device-pki-domain-1] certificate request from ra

[Device-pki-domain-1] certificate request entity en

[Device-pki-domain-1] quit

# Create the local RSA key pairs.

[Device] public-key local create rsa

# Retrieve the CA certificate.

[Device] pki retrieval-certificate ca domain 1

# Request a local certificate for Device.

[Device] pki request-certificate domain 1

Summary of Contents for 5120 EI Series

















































































































































































































































































































Search results

Summary of Contents for 5120 EI Series

Reviews:

Related manuals for 5120 EI Series

Brands by name

Popular brands

HP 5120 EI Series, Configuration Manual

Search results

Summary of Contents for 5120 EI Series

Reviews:

Related manuals for 5120 EI Series

Brands by name

Popular brands