HP 510 - Notebook PC, Reference Manual

Page: 13 / 102

3
load paper and originals
7
load originals and
paper
load originals
You can copy many types of originals onto different paper types, weights,
and sizes, including transparency film. It is important, however, that you
choose the right paper and make sure that it is loaded correctly and not
damaged.
There are two ways to load originals to your HP Digital Copier:
•
Position the originals on the glass
• Feed originals into the ADF, if one is attached
load originals on
the glass
You can copy almost any type of original by placing it directly on the glass.
1
Lift the lid and place the original face down on the glass, positioning
it in the bottom-right corner with its sides touching the right and
bottom edges.
It is important to place the original the bottom-right corner.
Tip! If your original is printed on transparency film, place a
blank piece of paper on top of the transparency for better
quality.
2
Close the lid.
Many of the Special Features options, such as
Which Size? or Poster , will not work correctly if the
glass and lid backing are not clean. For more
information, see clean the glass and clean the lid
backing on page 35.
GwenRG.book Page 7 Thursday, January 31, 2002 5:20 PM