P/N 480-0005-00-15
3-19
Chapter 3: Installation
Assign IP Address
Before you can configure Tenor CMS, you need to assign a valid IP address. An IP address is a 32 bit (up to 12
numeric characters) address used to identify each network device in the TCP/IP network. If the chassis does
not have an IP address, data will not be able to be sent to or from the chassis.
Assign IP address as follows:
1. Click on
Start> Programs> Accessories> Communications> HyperTerminal> Run.
The
HyperTerminal
window will be displayed.
2. Click on
Hypertrm.
3. Enter a
Connection Description
(i.e., name for each chassis such as
Routing Server
).
4. Click
Ok.
5. Choose the connection port on your PC from the
Connect Using
drop down list box (i.e., Direct to Com 1).
Click
Ok
. The
Com1 Properties
window will be displayed. See Figure 3-18.
Figure 3-18
Port Settings
Window
6. From the
Bits Per Second
drop down list box, choose
38400
.
7. From the
Data Bits
drop down list box, choose
8
.
8. From the
Parity
drop down list box, choose
None.
9. From the
Stop bits
drop down list box, choose
1
.
10. From the
Flow control
drop down list box, choose
None
.
11. Click on
Call>Call.
A connection to the CMS chassis will be established.
12. Press the Tenor CMS power switch to
On
. After the bootup sequence, the login prompt will appear.
13. Enter a login name. The default login name is
admin
.
