Removal and replacement procedures 42
2.
Using a T-25 Torx driver, remove the four screws securing the upper and lower electromagnetic lock
brackets to the rack chassis.
3.
Using an Allen wrench, remove the two black cap screws securing each electromagnetic lock to its
electromagnetic lock bracket.
4.
Remove the electromagnetic locks and cables from the rack.
To replace this component, see "Replacing the rear automatic door release (on page
42
)."
Replacing the rear automatic door release
1.
Align the electromagnetic locks to the electromagnetic lock brackets.
Summary of Contents for 403349-003
Page 13: ...Customer self repair 13 ...
Page 14: ...Customer self repair 14 ...
Page 15: ...Customer self repair 15 ...
Page 16: ...Customer self repair 16 ...
