Removal and replacement procedures 106
4.
Using an Allen wrench, insert and tighten one of the original Allen nuts and bolts into the remaining
screw hole. Compress completely.
5.
One by one, replace the three 40-mm Allen nuts and bolts with the original Allen nuts and bolts, until
the brackets are firmly compressed around the water inlet hose.
6.
Using a pipe wrench, reconnect the water inlet hose to the supply hose and tighten the water inlet
coupling.
7.
Restore water flow to the MCS unit ("
Restoring water flow
" on page
112
).
8.
Complete the operation checklist (on page
111
).
Summary of Contents for 403349-003
Page 13: ...Customer self repair 13 ...
Page 14: ...Customer self repair 14 ...
Page 15: ...Customer self repair 15 ...
Page 16: ...Customer self repair 16 ...
