[
bfd control-packet
bfd-source
ip-address
|
track track-entry-number
] } [
preference
preference-value
] [
tag
tag-value
] [
permanent
] [
description
description-text
]
undo
ip
route-static
vpn-instance
s-vpn-instance-name
&<1-6>
dest-address
{
mask
|
mask-length
} [
next-hop-address
[
public
] |
interface-type
interface-number
[
next-hop-address
] |
vpn-instance d-vpn-instance-name
next-hop-address
] [
preference
preference-value
]
View
System view
Default level
2: System level
Parameters
vpn-instance
s-vpn-instance-name
&<1-6>: Specifies a source MPLS L3VPN.
s-vpn-instance-name
is a case-sensitive string of 1 to 31 characters. &<1-6> indicates the argument before it can be
entered up to 6 times. Each VPN has its own routing table, and the configured static route is installed
in the routing tables of the specified VPNs.
dest-address
: Specifies the destination IP address of the static route, in dotted decimal notation.
mask
: Specifies the mask of the IP address, in dotted decimal notation.
mask-length
: Specifies the mask length, in the range of 0 to 32.
next-hop-address
: Specifies the IP address of the next hop, in dotted decimal notation.
interface-type interface-number
: Specifies the output interface by its type and number. If the output
interface is a broadcast interface, such as an Ethernet interface or a VLAN interface, the next hop
address must be specified.
vpn-instance d-vpn-instance-name
: Specifies a destination MPLS L3VPN.
d-vpn-instance-name
is
a case-sensitive string of 1 to 31 characters. If a destination VPN is specified, the router will search
the output interface in the destination VPN based on the configured
next-hop-address
.
next-hop-address public
: Indicates that the specified
next-hop-address
is a public network address,
rather than a VPN instance address.
preference
preference-value
: Specifies the preference of the static route, in the range of 1 to 255
and defaults to 60.
tag
tag-value
: Sets a tag value for the static route from 1 to 4294967295. The default is 0. Tags of
routes are used in routing policies to control routing. For more information about routing policies, see
"
Routing policy configuration commands
."
permanent
: Specifies the route as a permanent static route. If the output interface is down, the
permanent static route is still active.
description description-text
: Configures a description for the static route, which consists of 1 to 60
characters, including special characters like space, but excluding question marks (?).
bfd
: Enable the bidirectional forwarding detection (BFD) function to detect reachability of the static
route's next hop. Once the next hop is unreachable, the system will switch to a backup route.
control-packet
: Implements BFD in the control mode.
echo-packet
: Implements BFD in the echo mode.
bfd-source
ip-address
: Specifies the source address of BFD packets. Hewlett Packard Enterprise
recommends you configure loopback interface address.
track track-entry-number
: Associates the static route with a track entry. Use the
track-entry-number
argument
to specify a track entry number, in the range of 1 to 1024.
Description
Use
ip route-static
to configure a unicast static route.
25
