HP 3600 v2 Series Command Reference Manual Download

Page: 16 / 510

RelyNextHop: 0.0.0.0 Neighbor : 0.0.0.0

Tunnel ID: 0x0 Label: NULL

BKTunnel ID: 0x0 BKLabel: NULL

State: Active Adv Age: 06h46m35s

Tag: 0

Destination: 192.168.0.1/32

Protocol: Direct Process ID: 0

Preference: 0 Cost: 0

IpPrecedence: QosLcId:

NextHop: 127.0.0.1 Interface: InLoopBack0

BkNextHop: 0.0.0.0 BkInterface:

RelyNextHop: 0.0.0.0 Neighbor : 0.0.0.0

Tunnel ID: 0x0 Label: NULL

BKTunnel ID: 0x0 BKLabel: NULL

State: Active NoAdv Age: 06h46m35s

Tag: 0

Displayed first are statistics for the whole routing table, followed by a detailed description of each
route (in sequence).

Table 2 Command output

Field Description

Destination Destination

address/mask

length.

Protocol Protocol

that presents the route.

Process ID

Process ID.

Preference

Priority of the route.

Cost

Cost of the route.

IpPrecedence IP

precedence.

QosLcId QoS-local

ID.

NextHop

Address of the next hop on the route.

Interface

Outbound interface for packets to be forwarded along the route.

BkNextHop

Backup next hop.

BkInterface

Backup outbound interface.

RelyNextHop

Next hop address obtained through routing recursion.

Neighbor

Neighboring address determined by routing protocol.

Tunnel ID

Tunnel ID.

Label

Label.

BKTunnel ID

Backup tunnel ID.

BKLabel Backup

label.

Summary of Contents for 3600 v2 Series































































































































































































































































































































































































































































































































Search results

Summary of Contents for 3600 v2 Series

Reviews:

Related manuals for 3600 v2 Series

Brands by name

Popular brands

HP 3600 v2 Series, Command Reference Manual

Search results

Summary of Contents for 3600 v2 Series

Reviews:

Related manuals for 3600 v2 Series

Brands by name

Popular brands