View
Interface view
Default level
2: System level
Parameters
ipv6-address
: Destination IPv6 address of the summary route.
prefix-length
: Prefix length of the destination IPv6 address of the summary route, in the range of 0 to
128. It indicates the number of consecutive 1s of the prefix, which defines the network ID.
Description
Use
ripng summary-address
to configure a summary network to be advertised through the
interface.
Use
undo ripng summary-address
to remove the summary.
Networks falling into the summary network will not be advertised. The cost of the summary route is
the lowest cost among summarized routes.
Examples
# Assign an IPv6 address with the 64-bit prefix to VLAN-interface 100 and configure a summary with
the 35-bit prefix length.
<Sysname> system-view
[Sysname] interface vlan-interface 100
[Sysname-Vlan-interface100] ipv6 address 2001:200::3EFF:FE11:6770/64
[Sysname-Vlan-interface100] ripng summary-address 2001:200:: 35
timers
Syntax
timers
{
garbage-collect garbage-collect-value
|
suppress suppress-value
|
timeout timeout-value
|
update update-value
} *
undo timers
{
garbage-collect
|
suppress
|
timeout
|
update
} *
View
RIPng view
Default level
2: System level
Parameters
garbage-collect-value
: Interval of the garbage-collect timer in seconds, in the range of 1 to 86400.
suppress-value
: Interval of the suppress timer in seconds, in the range of 0 to 86400.
timeout-value
: Interval of the timeout timer in seconds, in the range of 1 to 86400.
update-value
: Interval of the update timer in seconds, in the range of 1 to 86400.
Description
Use
timers
to configure RIPng timers.
Use
undo timers
to restore the default.
By default, the garbage-collect timer is 120 seconds, the suppress timer 120 seconds, the timeout
timer 180 seconds, and the update timer 30 seconds.
282
